AFSC FILLING POSTS
Single Hose Fill Post:

Single Hose Fill Post with integral vent hose breakaway. The fill post body has a 5000 psi gauge and a
manual shut off valve installed in the face of the body. The fill post has the NFPA required signs printed on
the face of the body. All tubing is 1/4" .035 316 seamless, stainless steel and the hoses are Parker Paraflex
AGA 1-93 approved assemblies. All tube fittings are Swagelok brand. The fill post body is mounted on a 2"
aluminum post that can be inserted into a sleeve poured into a concrete bumper or mounted on a guard
rail. The sleeve can be supplied as an extra or a drawing is supplied at no extra charge

Doble Hose Fill Post:

Twin Hose Fill Post with integral vent hose breakaway. The fill post body has a 5000 psi gauge and a
manual shut off valve installed in the face of the body. The fill post has the NFPA required signs printed on
the face of the body. All tubing is 1/4" .035 316 seamless, stainless steel and the hoses are Parker Paraflex
AGA 1-93 approved assemblies. All tube fittings are Swagelok brand. The fill post body is mounted on a 2"
aluminum post that can be inserted into a sleeve poured into a concrete bumper or mounted on a guard
rail. The sleeve can be supplied as an extra or a drawing is supplied at no extra charge.
Twin High Hose Stand Alone CNG Dispenser
This dispenser is a two-line dispenser that independently meters the gas and gives you a display on
both sides of the dispenser. Flow Rate as high as 3000cfm have been seen with this dispenser in
certain configurations. Standard flow rate is 1500cfm. The New Micro Motion ® CNG50 sensor is used in
this dispenser to achieve the flow rate. The dispenser has 2, 4-20mA output that can send flow or
temperature to a remote controller. The dispenser has a dry contact and a 120VAC hook switch for an
"in use" signal and will send pulses to a card reader or a console. The Micro Motion ® transmitters are
located within the dispenser body and are factory set up and calibrated before shipment. AFSC supplies
an AGA 1-93 approved Parker Parflex CNG fill hose on all its dispensers. The Breakaway is the
Snap-tite In-Line type with a unique vent Breakaway attached to the fill hose Breakaway. All AFSC CNG
Dispensers have an ASME pressure relief valve inside the dispenser cabinet with a vent stack up
through the dispenser body. The cabinet is constructed of 11-gauge cold rolled steel with a
powder-coated finish; stainless steel material is optional. The high body style gives you the look of a
contemporary gasoline dispenser. The standard color is black but any custom colors can be applied to
the dispenser body. As an option this dispenser will temperature compensate the fill pressure of the gas
and do electronic sequencing of the gas from the storage to the dispenser using the Acufill® algorithm.
All of the sequencing valves are mounted internally in the dispenser. This Dispenser will communicate
with a card reader via pulse or Gilbarco protocall. Option may be selected by the client.
Gas Control Panels
High Pressure Distribution Systems:

AFSC sells standard and custom designed products for
distributing and dispensing natural gas at high pressures
for NGV refueling. Products include Dome Loaded
Regulator Panels, Emergency Shutoff Valve Panels and
Priority and Sequential Controls. Systems are available for
slow fill only, fast fill only, or combination slow fill and fast fill
applications. Distribution Systems used with storage for fast
filling are available for use with single or multiple banks of
storage with single or multiple hose drops. Enhanced
systems with PLC control and touch screen interface are
available.

AFSC High Pressure Distribution Systems for Natural Gas
are well known for their professional design, quality and
reliability.
CNG Dome Load Panel
CNG Sequencing/Priority Panel
Advance Fuel Systems, Corp.
(AFSC-OK)
9102 E. 46th. Street
Tulsa, OK. 74145
Ph.:+1-866-725-0801
Fx.:+1-866-725-0801
info_request@afsc-ok.com